Portable Gas Heater for Cylinder 3 Power Modes ThermoGo 4.2 kW

Portable Gas Heater for Cylinder | 3 Power Modes | ThermoGo 4.2 kW

Warm exactly what you want, where you want. ThermoGo 4.2 kW is a compact portable gas heater for a cylinder with three power levels that quickly raises the temperature in apartments, cottages, workshops, and garden plots. Thanks to efficient infrared ceramic panels, warmth is felt almost immediately and reaches deep into the room.
The piezoelectric ignition starts with a single click, and the top-mounted control knob lets you set the ideal output and gas consumption. Lockable castors make it easy to move the unit between rooms.

Key Benefits

• 3 power levels: 1.5 / 2.8 / 4.2 kW – tailor the heat and save gas.

• Quick start – piezo ignition, no matches needed.

• Efficient infrared heating – feel the warmth in moments.

• Mobility – castors with locks for easy repositioning.

• Safety – triple protection: oxygen depletion sensor (O₂), flame failure protection, tip-over switch.

• Economy – optimized gas use and zone heating where you need it.

• Large effective range – efficient for up to approx. 80 m² (depending on insulation and ventilation).

Best Use Cases

• Home/apartment (spot heating of selected rooms)

• Holiday cottage and garden plot

• Workshop, garage, service point – only with good ventilation

Important Safety Notes

Use only in well-ventilated rooms. Do not cover the heater and keep it away from flammable materials. Always use a sound regulator and hose, and place the cylinder securely behind the unit.

Technical Specifications

• Heating type: infrared, ceramic panels (3 pcs)

• Heat output (3 steps): 1.5 kW / 2.8 kW / 4.2 kW

• Gas consumption: 110 g/h (min) / 200 g/h (medium) / 305 g/h (max)

• Fuel: LPG; recommended butane cylinder up to 15 kg

• Appliance category: I3B

• Operating pressure: butane 23–30 mbar

• Injector size: 0.56 mm

• Ignition: piezoelectric

• Safety features: oxygen depletion sensor (O₂), flame failure cut-off, tip-over switch

• Casing: sheet 0.6 mm; base plate 0.8 mm; body with copper elements

• Hose: 55 cm

• Regulator (single-stage, low pressure): C31-37 / M30-500 / M30-700 (13 × 7 × 4.4 cm)

• Hose clips: 2 pcs (⌀ 2 cm)

• Lockable castors: 5 pcs (⌀ 4 cm)

• Dimensions (W × D × H): 420 × 430 × 730 mm

• Recommended area: up to 80 m²

• Room type: well-ventilated

• Units per pallet:36

In the Box

Heater, regulator, 55 cm hose, mounting kit (washers, screws, nuts, Phillips screwdriver, open-end wrench), user manual.